What is the price of shutters?
June Special !!! American Made Basswood Shutters $18 per sq.ft. or we will beat your lowest price. !!!
Typical Material Price Per Square Foot
- MDF $13 - $17
- Plastic - Vinyl $14 - $25
- Plastic - Vinyl Foam $16 - $31
- Poplar or Cedar Wood $18 - $24
- Finger-jointed Basswood $18 - $28
- 100% Whole Basswood $20 - $31
(These prices vary depending on the manufacturer selected, choice of rectangle or special shapes, and how the manufacturer calculates square footage.)
From time to time vendors advertise a discount off a high retail price (“Save 35 %!”), “free” windows or a lower price for shutter panels, only ($13.95/sf!). Like most industries, the shutter business has its share of overly enthusiastic marketers. Vendors sometimes over-price, then advertise “discounts” or “free” services or other “extras”. Watch out for hidden delivery fees tacked on, trick calculations, extra charges for installation or materials, or extra charges for “minimum order quantity”. By the time the shutters you wanted are delivered and installed, your bargain price may not be such a bargain.
Overall, shutters made in China are less expensive than American-made shutters, sometimes as much as one third less (see below for a fuller discussion of both countries’ products.)
And, as in many industries, manufacturers tend to be more price competitive than wholesalers, and wholesalers tend to be more competitive than retailers. This can vary quite a bit, however, depending on the levels of services and selections offered.
We manufacture our own custom shutter in Houston, TX.
We partnered with a local material supplier in Houston,Tx that sells shutter components nationwide. By doing this we can offer American-made shutters directly to you for the same price a shutter distributer can sell you Chinese shutters. And since the shutters are manufactured in Houston, our customers are able to tour the facility to see how our products are made.
We also offer all major brands of plantation shutters.
- Hunter Douglas
- Norman Shutters
- Sunland Shutters
What is the difference between American and Chinese shutters?
Both products have a market based on their strengths and weaknesses. Chinese shutter manufacturers have significant cost advantages based on their very low wage rates for workers, and fewer government regulatory expenses. However, Chinese manufacturers are handicapped by their distance from the U.S. market. As a result Chinese manufacturers have entered the U.S. market with more standardized products and an emphasis on lower price over quality, selection or service. Chinese product quality has improved over the last few years however, and some products are available with unique frame styles. Chinese shutters remain, for the most part, the least expensive shutters on the market, up to 25% less than American-made shutters.
American shutter manufacturers generally offer more customized products with better materials, more consistent quality, longer warranties, and faster delivery than offshore manufacturers. One of the reasons is that American manufacturers have a long history of domestic shutter production. The close proximity between the U.S. manufacturer and the U.S. consumer results in improved communication, enables greater customization and reduces turnaround times. Issues relating to the environment, the product disclosures and product safety regulations set the U the U.S. apart from most lesser-developed countries.
- Typical Warranty 5 years to lifetime
- Initial Delivery 4 to 6 weeks
- Repairs, as Needed 2 to 4 weeks
- Pricing $17 to $31:
- Rectangular or Specialty
- Typical Warranty 2 to 4 years
- Initial Delivery 8 to 12 weeks
- Repairs as Needed 8 to 12 weeks
- Pricing $14 to $31:
- Rectangular or Specialty
Which material is Best Wood, Vinyl, or MDF Shutters?
• Basswood is the strongest and lightest shutter material, but tends to be the most expensive. Its qualities mean little or no sagging in the panels or louvers, attractive slimmer pieces with greater architectural integrity, and the opportunity for more elegant designs. Some manufacturers are switching to cedar, poplar, pine or exotic hardwoods to decrease cost while maintaining most of the strength of basswood.
• Engineered Wood: Consumers who like the look of wood, but are unable to afford traditional hardwoods can find similar looks in laminated, finger-jointed and pressboard woods. These products are created by mixing and gluing wood pieces to provide straighter, less expensive material. However, these “engineered” woods tend to have issues with weight, inconsistent joinery, and glue that ages and wears differently than the adjoining wood. With time and wear, glued joints may flex differently creating surface cracks and dark glue marks.
• Plastic comes in a variety of forms including:
1. Extruded vinyl
2. Vinyl with an aluminum or MDF core
3. Vinyl foam.
Plastics can be made with color additives, injected with color additives, or made and then baked with a color coating. All plastics are produced in large batches making color choices limited and permanent. However, most plastics are less expensive than wood and virtually all are waterproof.
• Traditional extruded vinyl has the poorest weight to strength ratio and is the most likely to suffer from sagging, fading, yellowing, ultra-violet and heat-related damage. It is the least expensive of the plastics.
• Vinyl with an aluminum core is an improvement with a better weight to strength ratio. It is less likely to sag and can be made into a wider variety of custom shapes.
• Vinyl foam is the highest quality of the plastic products. It is lighter and stronger than traditional vinyl and avoids most of the sun-related defects that can be found with vinyl. It is the most expensive of the plastics and may cost as much or more than basswood.
• Vinyl-wrapped MDF (Medium Density Fiberboard): This is the material found beneath the “wood” decal in very inexpensive office furniture. It is no longer commonly used due to the defects inherent in the product.
• MDF is the weakest and heaviest of the shutter materials. It does not wear well but may be substantially cheaper than alternatives.
Shutter Material Strengths, Weaknesses.
• 100% Whole Basswood: The strongest and lightest shutter material. It has a very tight, uniform grain that resists water and other damage, and it won’t sag or turn yellow. It accepts stain and paint well. Price Fine homes
• Poplar or Cedar: Harder than basswood and less expensive. Very heavy wood with large greenish color variations that may bleed thru paint. Generally not attractive stained. Use in smaller windows where wood will be painted a dark color.
• Pine: Less expensive. Attractive wood grain with consistent color. Very soft wood, easily damaged. May soak up moisture. Uncommon. Can be used in stationary windows in elevated positions.
• Finger-Jointed Wood: Less expensive. Can be straighter than whole wood Distinctive zipper-like glue joints may be visible. Ages poorly. Bleeds thru paint. Cannot be stained. Can be used where wood will be painted a dark color.
• Laminated Wood: Less expensive. Can be straighter than whole wood. Glued laminates may age poorly. May bleed thru paint. Cannot be stained. Use where wood will be painted a dark color.
• Pressboard or MDF: Very inexpensive. Damages easily. Cannot be repaired. Soaks up moisture. Not commonly used. Use where low price is the only concern.
• Extruded Vinyl: Inexpensive. Waterproof. May yellow, crack or sag if exposed to sunlight. May use in apartments and bathrooms.
• Vinyl-wrapped MDF: Very inexpensive. Wrap tends to separate, yellow and crack. MDF cannot be repaired. Not commonly used. Use where low price is the only concern.
• Vinyl with Aluminum: Inexpensive. Waterproof. May yellow and crack if exposed to sunlight. May use in bathrooms and finer apartments.
• Vinyl Foam: Waterproof. Strong. Won’t age or yellow. Moderate price. Limited color options. Not stainable May use where panels will be exposed to constant moisture.
Where is the best place to buy Shutters?
• Big Box Stores offer a wide selection, moderate prices, and quality assurance guarantees. They may not have as much knowledge about different products as other sources. For consumers who know what they want and how it will look, this might be a good avenue.
• Window Coverings Retailers offer a wide selection, moderate prices, product knowledge and decorating expertise, but may not offer traditional warranties. For consumers who are comfortable making in design decisions based on selections available.
• Interior Designer/Decorator generally has good knowledge of the various products, along with decorating expertise, but may not offer traditional warranties or the most competitive prices. For consumers who value saving time and having the assistance of a design expert. May not be the lowest price.
• Factory Direct has the lowest prices, the widest selection and good knowledge of the various products. May not offer decorating expertise to coordinate the rest of interior design. For consumers who know what they want they want and who want a good price and a quality product.
Shutters Myths and Legends.
You know you are talking to a slick or misinformed salesperson if you hear one of the following:
• “Wood will warp… or sag… or chip… or yellow… over time.”
Basswood is stronger and lighter than vinyl, MDF and other shutter materials, so it is actually LESS likely to warp or sag than these materials. The likelihood of yellowing and chipping depends on the type of paint and undercoat used. Top quality basswood is typically painted with acrylic or the best available waterborne paints. These are highly chip-resistant and much less likely to exhibit surface damage than most plastic or lower quality painted products. Inexpensive vinyl products are the most likely to have surface issues including yellowing, fading, chipping, and sagging.
• “Plastic is easier to clean and maintain than wood.”
Both materials are cleaned the same way with a duster or damp cloth. Both materials are highly stain-resistant. Both materials will be damaged by fire, stain and caustic materials.
• “Wood attracts more dust than plastic.”
Plastic shutters may build up a static charge that attracts dust. However, even without static, dust falls on all shutter materials at the same rate, and is removed the same way: with a duster or damp cloth.
• “Sandblasted wood attracts more dust than smooth wood.”
Sandblasted wood, with its irregular, smooth surface tends to hide dust better than other surfaces, but cleans up the same way.
• "Wood will warp."
This myth, though often repeated, confuses us the most. All of the available evidence - from hundreds of years of fine wood furniture to wood framed houses, wood joists, wood beams etc. - indicates that properly prepared and maintained wood does NOT warp. There may have been a time before kiln dried lumber was popular, or when green wood was used, that warping would have occurred as the wood cured. However, that time is literally hundreds of years past. Based on the last 30 years of experience with kiln dried Basswood we are confident in guaranteeing that, unless it is exposed to severe moisture, our wood will NEVER warp.
• "Plastic shutters insulate better than wood shutters."
This is akin to saying a plastic picket fence corrals more bees than a wood one. The loss of cold or heat is between the pickets, not through the plastic or wood. As a practical matter, when any shutters are open, they don't have much insulation value at all. When closed, they're filled with gaps between louvers, gaps between panels and frames, and gaps between frames and the mounting surfaces. The best insulating shutter is the one with the narrowest gaps and the most accurate installation. A cheap shutter, even with the best installation, is likely to be a mediocre insulator, regardless of the materials used. Even a great shutter, if installed poorly, is a lousy insulator. High quality, custom Basswood shutters, installed properly, tend to have the narrowest gaps and best insulation available.